产品讲解
Gliss'Guard® can be applied to mineral surfaces, ceramic tiles, marble, terrazzo concrete, granite, tiling, enamel and wherever surfaces are slippery especially when wet.
Gliss'Guard® can be used in industry, pedestrianised streets, public institutions, apartment block entrance halls, retirement homes, sports halls, swimming pools, kitchens, bathrooms, shower cubicles, enamel baths, etc; anywhere where surfaces are slippery especially when wet.
特征
Surface treatment and cleaning product.
Renders slippery surfaces slip-resistant after only one coat.
Non-flammable – environmentally user friendly.
Do not use or store at temperatures below 5°C.
消耗量
使用
To treat a SHOWER CUBICLE or ENAMEL BATH, use undiluted
Gliss'Guard® on a clean and dry surface, working it in with a sponge, making sure that the product is evenly distributed throughout the treatment’s duration (between 30 and 40 minutes).
Do not allow to dry and add more if necessary.
For
tiles, graniteware, floor tiling : spray on undiluted (leave the product to take effect for 20 – 30 minutes).
For
concrete and terrazzo concrete : spray on undiluted (leave the product to take effect for 20 – 30 minutes). 1 litre of undiluted
Gliss'Guard® covers 107 – 172 square feet.
For
marble and polished granite : use diluted with an equal amount of water (leave to take effect for 15 – 20 minutes); 1 litre can cover 269 – 323 sq. ft. depending on the surface’s porosity.
Pour or spray
Gliss'Guard® onto the surface.
Work the product in with a brush during application to ensure that it is well distributed. Do not allow to dry and add more if necessary. Do not apply when hot or in of the product.
Depending on the surface and desired slip resistance, apply the product a second time.
After treating the surface, rinse it thoroughly with water. The treated surface can be used immediately.
Any equipment used should be rinsed with water..
包装
桶 : 1L, 5L, 25L.

环保及无危险性
资料及图片供于参考.
我们拒绝承担对于不正规的施工而产生的问题.
必须预先作试验